CCNA Training in HSR Layout

Best CCNA Training in HSR Layout

CCNA certification helps one in internetworking jobs ensuring that employees of associate-level have the property to validate, to configure, to install, to operate and also help in network troubleshoots. It is quite an interesting program and most of the employees now days go for a certified course so as to get better promotions and better opportunities in the corporate world. But it is necessary to get certified from good institutions who promise a better tomorrow. CCNA training institute in HSR is one such university that allows one to achieve the best career opportunity.

Best CCNA Training in HSR Layout

We all are very busy building our careers. It is time to stink differently since normal graduations and post graduations won’t work these days. Even if when you are attached to a working space, an office or organization or any business, recruiters seek business and certified degrees that will help you establish your career. With this comes a specialized career course that not only adds value to your resume but also establishes yourself in your genre. CCNA training institute in HSR is one such space that provides you with unique CCNA training. It’s the genre of technology and data management and one has to be a pro at this. Those network engineers and data engineers working their best in industries, if they gain this certificate course, will not only be posted to a higher designation but some can even travel the world!

What are there is CCNA training?

For those of you who are new to this course of study, CCNA training is more of data analytics. This course is being supported by expert trainers who have good knowledge of network management and this course helps all employees to get daily work with full confidence as well as success. Here are some objectives of this course stated in detail:

• It is important to learn CISCO guidelines thoroughly and this course works by CISCO guidelines only.
• One gets to have hands-on practical lab-based experience so as to better understand and evaluate any progress.
• Tests and projects are given on a daily basis so as to evaluate the progress of the study.
• There are certified instructors who have wide industrial knowledge.
• The modules of this course are designed in a way that meets all the requirements of the CCNA program.
• A real-life application is possible through this unique course.
• The trainer associated with this course of study keeps in mind every candidate’s performance starting from the beginning until the end of the training.
• One gets to gain theoretical as well as practical knowledge that helps him/her in gaining maximum knowledge.
• Every student is provided with a course kit that consists of ample study materials so that each and every candidate prepares well for this training test.
• Customized mock tests are taken at the end of the course to prepare each of the candidates with the real-life examination.
• If a student finds any doubt anywhere, lectures are conducted again and special classes are taken where notes are discussed.

Best features of the CCNA training program

Well, every training program carries with it a certain USP and so does CCNA training. CCNNA training institute in HSR layout has some best training features up its sleeves that can surprise you!

• In HSR Layout, the size of each batch is only restricted so that mentors can give maximum attention to each and every candidate.
• Students, in case of any emergency and whenever required, via permission, can postpone certain classes. These classes then get rescheduled accordingly.
• Even before the session starts the scheduled of the classes is planned in meetings with the mentors so that students can attend all classes and understand the course to its depth.

This certificate course in HSR has with it five different levels all of which start from entry to the architect level. There are expert career guides who help every candidate to choose the appropriate level of the CCNA accordingly. There are re-certifications possible which also ensure that these IT professionals are properly updated with all the current trends of the ever-changing technologies around.

Why trust with CCNA Training in HSR Layout?

It is better to rely on trustworthy institutes for CCNA training since you need to have laboratory essentials for studying this course. Only good institutes and universities will be able to provide you with this. CCNA training program in HSR layout is one of those institutes where one can rely upon.

A huge campus with sprawling background and students’ stay is provided where students can study and have fun as well. It is always better to go with a full-time curse rather than indulge in a part-time curriculum.  Candidates from all around the world come here to join this course and thus the competition is on the higher side.

You have to be very careful while studying since you have to be pro with the latest news of technology and software systems around. Digitally the world is progressing towards a better tomorrow and thus it is necessary to be digitally advanced learning all the nitty-gritty of internet handling.

The course curriculum packages are not so expensive and thus candidates belonging from mediocre families can opt to go ahead with this course. There are easy installments available too paid through bank transfers or cheques.

After completion of the CCNA course

CCNA training in HSR layout ensures that every student completes the course with utmost seriousness and detail. After completion of the course there are certain steps taken:

• After the course is completed, candidates find confidence and positivity within themselves.
• They will gain knowledge of the strategies of networking or internetworking procedures.
• Students will then be able to easily identify both the basic as well as vital components of data and networking such as-servers, interface cards, media, internetworking devices, topologies, and many other internet and data processing works.
• It will be easier to gain knowledge on Local area networking, WAN, storage area networking, VPNs, etc.
• One will get to have correct knowledge of network accessing methods and also their features.
• Also, huge knowledge on addresses of networking, protocol networking, and their purposes are gained through this training.
• Technologies on WAN, the functioning of the same, its operation and component handling are major points that are gained through this.
• Last but not least, candidates can properly handle anomaly in commanding and debugging them as well.

Syllabus of CCNA Training in HSR Layout

Networking concepts

• Components of a network – router, switch, hub, bridge, etc
• Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
• Defining Network requirements – NIC- Ethernet (CSMA/CD)
• 10/100/1000 Mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
• 10 base 2T – UTP/STP – CAT 1/2/3..
• Straight through/cross crimping (only details no practical)
• Fiber optics – Single/Multimedia
• 100 Base-TX/FX etc – wireless communication.
• Ethernet cabling Standard.
• Connecting Devices
• Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

OSI – Model

• 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
• Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
• Broadcast/Collision domain – point of -Hub/Switch/Router
• L4 – 3way handshake – windowing – and about – Connectionless
• Packet size [64B (mini) to 1518B (Max)]

TCP/IP Model & Ipv4 Addressing

• All Layers of TCP/IP Compound with – OS
• Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
• Transport Layer – TCP/UDP – TCP Segment Format
• 3-way handshake/windowing – UDP segment Format
• Internet Layer
• IP datagram format – Protocol No. – TCP 6 – UDP 17
• ICMP – ARP – RARP
• Introduction to IP addressing – Class A/B/C/D/E
• Private IP address – First OCTET range etc.

Subnetting

• Default Subnet Mask
• Class C Subnetting & Practice no. given
• Class B Subnetting & problems
• Class A Subnetting & problems

Introduction to IPV6

• Introduction
• Host Address Assignment
• Unicast, Multicast, and other Special ipV6 Addresses
• Configuring ipV6 Routing and Routing Protocols
• Translations between ipV4 and ipV6
• Summary

Basic of Router & Configuration

• Selection of Router & Cabling a Route
  • When Router used – LAN with WAN connect – to connect networks of different IP
  • The different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • Cables used in different interfaces/purpose of interfaces
  • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
  • Different CISCO series – modular/fixed – 10mbps/100 etc
  • Straight through between DTE & DCE

Different modes of operation & basic commands

• Internal Components:
  • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
  • The different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • DRAM -Running Config
  • NVRAM – Startup Config
  • Flash MEM – IOS
• Different Modes:
  • ROM Monitor – Reboot Mode – Setup – Exec Model
• Exec Mode
  • User -Privilege – Global – Sub-configuration mode
  • Syntax/command to switch between modes
  • Assigning an IP address for -E0-S0-S1
  • Enabling/disabling – console/privilege / by password
  • Mold – command
  • Show Config / start / run / version / flash
• Basic commands practice
  • Changing between modes – (user-privilege- Global-etc)
  • IP address configuration-E0-S0-S1
  • Password – enabling – encrypting it
  • Practice – motd – show commands – editing commands
  • Assigning hostname (for Router)
• Advanced Commands
  • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
  • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
  • Practice the above commands as well as following
  • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
  • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
  • Overview of Cisco SDM (Security Device Manager)

IP Routing

• IP Routing, Static Routing & Default Routing
  • IP routing – static routing – default- dynamic routing
  • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
  • Commands/syntax – Static/default routing
• Static Routing & Default Routing
  • Practical-session for Static & default routing
• Dynamic Routing and RIP
  • Dynamic Routing – IGP & EGP.
  • IGP – RIP-OSPF – EGRP – EIGRP
  • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
  • Role of Routing Protocol – builds/updates/selects & Routes the packet
  • Soluting for Routing loops – Max. loop count – split-horizon – Route poison Reverse – Hold down Timer
  • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
  • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
  • Command – Router RIP Network
  • Sh IP route
  • Timer value for RIP– Update/Invalid/ hold down/flush Timer
• RIP
  • Dynamic Routing – RIP Practical
• Dynamic Routing EIGRP & OSPF
  • Limitations of the distance vector algorithm
  • Features of EIGRP and its operations
  • Configuring EIGRP – “Auto-redistribution”
  • Verify and troubleshooting EIGRP
  • Features of OSPF and its operation
  • Configuring single area OSPF
  • Verify and troubleshoot OSPF
• Access List
  • Purpose/advantage of Access-list
  • IP [-for a host – for a network/sub network].
  • Std IP access-list – wild card calculation
  • Extd IP access list
  • Switch port ACL,
  • Step involved in creating access list
  • Applying access list at the interface – (inbound/outbound)
  • Named access-list for IP
  • Access-list in Telnet sessiont
• IP standard Access List
  • Practical on
  • IP Std access-list
• IP Extended Access List
  • IP Extd access-list, named access lists
• NAT
  • Implement, Verify & Troubleshoot NAT
    • Explain the Basic Operation Of NAT
    • Using (including CLI/SDM)
    • Practicals on Static NAT, Dynamic NAT and PAT
    • Troubleshoot NAT issues
• WAN Technologies
  • WAN Technologies- Leased Line
    • Leased line
    • P to P communication
    • HDLC & PPP protocol-features
    • Enabling HDLC & PPP
  • PPP Link
    • PPP layer & its explanation/role
    • PAP/CHAP role
    • Configuring PAP/CHAP using commands
  • VPN
    • Describe VPN technology
    • Importance Of VPN
    • Benefits & Role
    • Impact & Components
  • Frame-Relay
    • Packet Switched Network
    • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
    • Enabling Frame-relay
    • Inverse ARP
    • Configuring frame-relay for
    • Mesh Network
    • Star Network
    • Combination of above two
• Switching
  • Switching Operation and Configuration
    • Function –add-learning / Forward-filters the Frame / loop avoidance
    • Redundant path and its problems
    • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
    • Modes of operation of switch/Bridge
    • Port duplexing
    • Switch & hub – half duplex
    • Switch & Server – full duplex
    • CISCO catalyst switch 1912 & 1924 interface details
    • M/K/I modes
    • Basic and advanced commands
    • Enabling & configuring MAC address table
  • VLAN Configuration
    • VLAN – ISL – Trunking
    • Enabling Trunking
    • Assigning VLAN No. & name
    • Configuring ports to a specific VLAN
    • VTP purpose
    • VTP domain
    • VTP modes of operation
    • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
    • Implement Basic Switch Security (including Port Security , Trunk access .etc )
• Wireless LAN
  • Wireless Intro & Operation
    • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
    • Ad-hoc mode, infrastructure mode
    • SSID, BSS, ESS
    • Basic Parameters to configure on a Wireless Network
    • Wireless Security Feature’s (WEP, WPA 1 / 2 )
    • Implementing Wireless Networks

CCNP – Route

CCNA Course Revision

• Routers & Switches
• Addressing
• Routing and its Importance

Introducing EIGRP

• EIGRP Capabilities and Attributes
• Underlying Processes and Technologies
• EIGRP Operation
• EIGRP Tables
• EIGRP Metric
• Calculating the EIGRP Metric
• Integrating the EIGRP and IGRP Routes

Implementing and Verifying EIGRP

• Configuring Basic EIGRP
• Using a Wildcard Mask in EIGRP
• Configuring the ip default-network Command
• ip default-network Command
• Verify EIGRP IP Routes
• EIGRP Configuration,Verify EIGRP IP Operations

Configuring Advanced EIGRP Options

• Route Summarization
• Configuring Manual Route Summarization
• Load Balancing Across Equal Paths
• Configuring Load Balancing Across Unequal-Cost Paths
• Variance
• EIGRP Bandwidth Use Across WAN Links
• Configuring EIGRP Bandwidth Use Across WAN Links
• WAN Configuration—Frame Relay Hub-and-Spoke Topology
• WAN Configuration–Hybrid Multipoint

Configuring EIGRP Authentication

• Router Authentication
• MD5 Authentication
• Configuring MD5 Authentication
• Verifying MD5 Authentication
• Troubleshooting MD5 Authentication

Using EIGRP in an Enterprise Network

• Scalability in Large Networks
• EIGRP Queries
• EIGRP Stubs
• Limiting Updates and Queries: Using EIGRP Stub
• EIGRP stub Parameters
• SIA Connections
• Preventing SIA Connections
• Graceful Shutdown

Introducing the OSPF Protocol

• Link-State Routing Protocols
• OSPF Area Structure
• OSPF Adjacency Databases
• Calculating the OSPF Metric
• Link-State Data Structures

OSPF Packets

• OSPF Neighbor Adjacencies
• Exchanging and Synchronizing LSDBs
• Maintaining Network Routes
• Maintaining Link-State Sequence Numbers
• debug ip ospf packet

Configuring OSPF Routing

• Configuring Basic Single-Area and Multiarea OSPF
• Configuring OSPF on Internal Routers of a Single Area
• Configuring OSPF for Multiple Areas
• Configuring a Router ID
• Verifying the OSPF Router ID
• Verifying OSPF Operation
• The show ip route ospf Command
• The show ip ospf interface Command
• The show ip ospf neighbor Command

OSPF Network Types

• Introducing OSPF Network Types
• Adjacency Behavior for a Point-to-Point Link
• Adjacency Behavior for a Broadcast Network Link
• Selecting the DR and BDR
• Adjacency Behavior for an NBMA Network
• OSPF over Frame Relay Configuration Options
• Sample Configuration of a Router Using OSPF Broadcast Mode
• OSPF over Frame Relay NBMA Configuration
• neighbor Command
• OSPF over Frame Relay Point-to-Multipoint Configuration
• Point-to-Multipoint Configuration
• Using Subinterfaces in OSPF over Frame Relay Configuration
• Point-to-Point Sub interface
• Multipoint Sub interface
• OSPF over NBMA Topology Summary
• Tracking OSPF Adjacencies

Link-State Advertisements

• OSPF Router Types
• OSPF Hierarchical Routing
• OSPF Virtual Links
• OSPF Virtual Link Configuration
• show ip ospf virtual-links Command
• OSPF LSA Types
• Type 1
• Type 2
• Types 3 and 4
• Type 5
• Type 6
• Type 7
• Type 8
• Types 9, 10, and 11
• LSA Type 4—Summary LSA
• Interpreting the OSPF LSDB and Routing Table
• Interpreting the OSPF Database
• Configuring OSPF LSDB Overload Protection
• Changing the Cost Metric

OSPF Route Summarization

• OSPF Route Summarization
• Using Route Summarization
• Configuring OSPF Route Summarization
• Route Summarization Configuration at ABR
• Route Summarization Configuration at ASBR
• Benefits of a Default Route in OSPF
• Default Routes in OSPF
• Configuring a Default Route in OSPF
• Default Route Configuration

Configuring OSPF Special Area Types

• Configuring OSPF Area Types
• Configuring Stub Areas
• Configuring Totally Stubby Areas
• Interpreting Routing Tables
• Routing Table in a Standard Area
• Routing Table in a Stub Area
• Routing Table in a Stub Area with Summarization
• Routing Table in a Totally Stubby Area
• Configuring NSSAs

Configuring OSPF Authentication

• Types of Authentication
• Configuring Simple Password Authentication
• Troubleshooting Simple Password Authentication
• Configuring MD5 Authentication
• Verifying MD5 Authentication
• Troubleshooting MD5 Authentication

Operating a Network Using Multiple IP Routing Protocols

• Using Multiple IP Routing Protocols
• Defining Route Redistribution
• Using Seed Metrics

Configuring and Verifying Route Redistribution

• Configuring Redistribution
• Redistributing Routes into RIP
• Redistributing Routes into OSPF
• Redistributing Routes into EIGRP
• Redistributing Routes into IS-IS
• Verifying Route Redistribution

Controlling Routing Update Traffic

• Configuring a Passive Interface
• Configuring Route Filtering Using Distribute Lists
• Implementing the Distribute List
• Defining Route Maps
• Using route-map Commands
• Implementing Route Maps with Redistribution
• Defining Administrative Distance
• Modifying Administrative Distance

DHCP (Dynamic Host Configuration Protocol)

• Describing the Purpose of DHCP
• Understanding the Function of DHCP
• Configuring DHCP
• Configuring the DHCP Client
• Explaining the IP Helper Address
• Configuring DHCP Relay Services

Explaining BGP Concepts and Terminology

• Using BGP in an Enterprise Network
• BGP Multihoming Options
• BGP Routing Between Autonomous Systems
• BGP Is Used Between Autonomous Systems
• AS Numbers
• Comparison with IGPs
• Path-Vector Functionality
• Features of BGP
• BGP Message Types

Explaining EBGP and IBGP

• BGP Neighbor Relationships
• Establishing EBGP Neighbor Relationships
• Establishing IBGP Neighbor Relationships
• IBGP on All Routers in Transit Path
• IBGP in a Transit AS
• IBGP in a Nontransit AS
• TCP and Full Mesh

Configuring Basic BGP Operations

• Initiate Basic BGP Configuration
• Activate a BGP Session
• The BGP neighbor Command
• Shutting Down a BGP Neighbor
• BGP Configuration Considerations
• Identifying BGP Neighbor States
• Authenticating in BGP
• Troubleshooting BGP

Selecting a BGP Path

• Characteristics of BGP Attributes
• AS Path Attribute
• Next-Hop Attribute
• Origin Attribute
• Local Preference Attribute
• MED Attribute
• Weight Attribute
• Determining the BGP Path Selection
• Selecting a BGP Path
• Path Selection with Multihomed Connection

Using Route Maps to Manipulate Basic BGP Paths

• Setting Local Preference with Route Maps
• Setting the MED with Route Maps
• Implementing BGP in an Enterprise Network

Implementing IPv6

• Introduction to IPv6
• Describing IPv6 Features

Defining IPv6 Addressing

• Describing IPv6 Addressing Architecture
• Defining Address Representation
• IPv6 Address Types
• Multiple ISPs and LANs with Multiple Routers

Upcoming Batch Schedule for CCNA Training in HSR Layout

Besant Technologies provides flexible timings to all our students. Here are the CCNA Classes in HSR Layout Schedule in our branches. If this schedule doesn’t match please let us know. We will try to arrange appropriate timings based on your flexible timings.

• 16-12-2024 Mon (Mon - Fri)Weekdays Batch 08:00 AM (IST)(Class 1Hr - 1:30Hrs) / Per Session Get Fees
• 12-12-2024 Thu (Mon - Fri)Weekdays Batch 08:00 AM (IST)(Class 1Hr - 1:30Hrs) / Per Session Get Fees
• 14-12-2024 Sat (Sat - Sun)Weekend Batch 11:00 AM (IST) (Class 3Hrs) / Per Session Get Fees

Can’t find a batch you were looking for?

Request a Batch

Trainer Profile of CCNA Training in HSR Layout

Our Trainers provide complete freedom to the students, to explore the subject and learn based on real-time examples. Our trainers help the candidates in completing their projects and even prepare them for interview questions and answers. Candidates are free to ask any questions at any time.

• More than 7+ Years of Experience.
• Trained more than 2000+ students in a year.
• Strong Theoretical & Practical Knowledge.
• Certified Professionals with High Grade.
• Well connected with Hiring HRs in multinational companies.
• Expert level Subject Knowledge and fully up-to-date on real-world industry applications.
• Trainers have Experienced on multiple real-time projects in their Industries.
• Our Trainers are working in multinational companies such as CTS, TCS, HCL Technologies, ZOHO, Birlasoft, IBM, Microsoft, HP, Scope, Philips Technologies etc

CCNA Training in HSR Layout Exams & Certification

Besant Technologies Certification is Accredited by all major Global Companies around the world. We provide after completion of the theoretical and practical sessions to fresher’s as well as corporate trainees.

Our certification at Besant Technologies is accredited worldwide. It increases the value of your resume and you can attain leading job posts with the help of this certification in leading MNC’s of the world. The certification is only provided after successful completion of our training and practical based projects.

CCNA Certification

After all that we have discussed above, here, in short, we will give a glimpse of the skills measured by this certificate course. The exact areas of knowledge and talents that are covered in CISCO tests are here:

• This certificate course teaches how in best ways the various topologies of networking interact with each other so as to build a very secure IT networking system.
• A computer network works in a certain way and this course implies how this works well and in what does it properly interact with all devices that are networked.
• It teaches how one can actually do configuration, verification and manage a troubleshoot switch alongside the VLAN and connect it with Interswitch communicating systems.
• Through this, the IP addressing system is implemented and IP addresses connect with certain network processing.
• It teaches further to manage configuration, verification, and routing of troubleshooting via operations of routers with immediate CISCO requirements.
• With this, proper network security threats are measured and threat mitigations and methodologies are described. There are also countermeasures for this.
• Instant tasks are performed via descriptions as well as preformation with WAN networks and administrations.
• All WAN links are set up properly, verified daily and executed via correct methods and measures so as to connect to a wide area of the network.
• This certification teaches you to properly implement as well as support a system called Network Address Translation or NAT and also helps in Access Control lists which is another system in almost all the branch office networking system.

Now that you all know it about this unique study or training, what are you thinking next? Its time to give your career a turning point and get the certification done as soon as possible. If you dream big, you will achieve big. And no need to worry at all since there are expert professionals with instant solutions up their sleeves to manage to understand you and help you with this wonderful study of technology. Upgrade yourself with this new thought and have a chance to live your dreams with this ultimate CCNA certification course from HSR.

Key Features of CCNA Training in HSR Layout

Training Courses Reviews

Frequently Asked Questions